CB2 RODNEY Montage-instructies - Pagina 2
Blader online of download pdf Montage-instructies voor {categorie_naam} CB2 RODNEY. CB2 RODNEY 5 pagina's. Tall chest
Pagina afdrukkenrodney
TALL CHEST
middle
panel
left side
panel
With the assistance of another adult, carefully
place left/right side panels and middle panel
onto clean padded surface as shown. Attach
middle panel to left and right side panels with 4
brackets, 4 flat washers, 4 spring washers and
4 large bolts, using an allen wrench. Do not over
1
tighten the bolts.
B
bottom panel
A. Slide back panel into grooves of left and right side panels.
B. Fit pre-assembled dowels of left and right side panels into
corresponding holes of bottom panel. Secure left and right side
panels to bottom panel with 4 flat washers, 4 spring washers
and 4 small bolts, using a phillips head screwdriver.
C. Secure back panel to top and bottom panel with 6 small
3
screws, as shown.
Made in Vietnam - r06
NOTE: Do not over
tighten the bolts.
right side
panel
NOTE: Make sure left
and right side panels are
assembled with grooves
facing back as shown
C
A
back panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Position top panel as shown. Fit pre-assembled
dowels of left and right side panels into
corresponding holes of top panel. Secure left and
right side panels to top panel with 4 flat
washers, 4 spring washers and 4 small bolts as
2
shown, using a phillips head screwdriver.
B
C
top panel
Attach 2 legs to assembled unit
by turning each leg clockwise
4
as shown.
leg
Page 2 of 5