4qd PRO-360 Series Manuale di istruzioni - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per Controllore 4qd PRO-360 Series. 4qd PRO-360 Series 20.

17. Using the "learn" function

The "learn" function allow you to match zero speed, full forward, and full reverse

from the Pro-360 to specific input signals from your pot, radio control receiver, or

other input source.

Set either "Pot learn" or "RC learn" active [only one per profile].

17.1

Select "Learn zero" and press SEL, the Pro-360 will show a number related to the

17.2

value detected from the pot [or other input].

17.3

Set the pot, transmitter stick, or other input to the position you want to have as

zero, and press SEL to capture the associated number.

Repeat steps 15.2 – 15.3 for "Learn max forward" and "Learn max reverse"

17.4

17.5

Use BACK to return to the main menu and then save changes.

Notes:

•

If you are not using "Joystick" mode, you should set "Learn max reverse"

to the same value as "Learn max forward". Reverse is then selected by

the reverse switch.

•

Volt mode uses the "Pot learn" function for learning.

PRO-360 V2.3/4 10/20

Page 13