4qd PRO-360 Series Kullanım Kılavuzu - Sayfa 13

Kontrolör 4qd PRO-360 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 4qd PRO-360 Series 20 sayfaları.

4qd PRO-360 Series Kullanım Kılavuzu

17. Using the "learn" function

The "learn" function allow you to match zero speed, full forward, and full reverse
from the Pro-360 to specific input signals from your pot, radio control receiver, or
other input source.
Set either "Pot learn" or "RC learn" active [only one per profile].
17.1
Select "Learn zero" and press SEL, the Pro-360 will show a number related to the
17.2
value detected from the pot [or other input].
17.3
Set the pot, transmitter stick, or other input to the position you want to have as
zero, and press SEL to capture the associated number.
Repeat steps 15.2 – 15.3 for "Learn max forward" and "Learn max reverse"
17.4
17.5
Use BACK to return to the main menu and then save changes.
Notes:
If you are not using "Joystick" mode, you should set "Learn max reverse"
to the same value as "Learn max forward". Reverse is then selected by
the reverse switch.
Volt mode uses the "Pot learn" function for learning.
PRO-360 V2.3/4 10/20
Page 13
www.4qd.co.uk