Dynamic Projection Mirror Head MH17 Manuale di installazione rapida - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione rapida per Accessori per proiettori Dynamic Projection Mirror Head MH17. Dynamic Projection Mirror Head MH17 8.

Stampa la pagina

Mirror Head Quick Installation Guide

For the full manual please visit http://dynamicprojection.com/mirror-head-assembly

Mounting of the projector

For further help on assembly please watch our assembly videos: http://www.dynamicprojection.com/mirror-head-assembly/

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

7 .

Mount the base-plate to the projector and projector

frame. If the projector is already mounted to the frame

you have to remove the speciﬁc screws. WARNING:

Secure the projector at any time so it cannot fall out or

down. Use a second person to help.

Lock-in the Mirror Head into the base-plate and secure

the two screws at the front and the two screws at the

bottom. NOTE: This step of the installation can be reversed.

Connect the RS232 and AC power-cord to the projector

and control unit.

Prepare the setscrew on the hex key

and put one drop of Loctite

screw-lock onto it.

Turn the setscrew into the drive arm

by two turs.

Slip over the end-stop (brass part)

over the pan drive shaft.

Take the whole drive arm end slip it

over the pan drive shaft until it

reaches the end-stop.

Secure the setscrew with the hex key.

Connect the motor signal cable and

mount the glue strip on the motor.

QIG - Version 2.1