Dynamic Projection Mirror Head MH17 Manual de instalação rápida - Página 4

Procurar online ou descarregar pdf Manual de instalação rápida para Acessórios para projectores Dynamic Projection Mirror Head MH17. Dynamic Projection Mirror Head MH17 8 páginas.

Imprimir página

Mirror Head Quick Installation Guide

For the full manual please visit http://dynamicprojection.com/mirror-head-assembly

Mounting of the projector

For further help on assembly please watch our assembly videos: http://www.dynamicprojection.com/mirror-head-assembly/

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

7 .

Mount the base-plate to the projector and projector

frame. If the projector is already mounted to the frame

you have to remove the speciﬁc screws. WARNING:

Secure the projector at any time so it cannot fall out or

down. Use a second person to help.

Lock-in the Mirror Head into the base-plate and secure

the two screws at the front and the two screws at the

bottom. NOTE: This step of the installation can be reversed.

Connect the RS232 and AC power-cord to the projector

and control unit.

Prepare the setscrew on the hex key

and put one drop of Loctite

screw-lock onto it.

Turn the setscrew into the drive arm

by two turs.

Slip over the end-stop (brass part)

over the pan drive shaft.

Take the whole drive arm end slip it

over the pan drive shaft until it

reaches the end-stop.

Secure the setscrew with the hex key.

Connect the motor signal cable and

mount the glue strip on the motor.

QIG - Version 2.1