activTek INDUCT 2000 Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria activTek INDUCT 2000. activTek INDUCT 2000 9. Electronic air purification system
Anche per activTek INDUCT 2000: Manuale d'uso (16 pagine)
Stampa la pagina
CONGRATULATIONS . . .
on your purchase of an activTek INDUCT
750/2000 air purification enhancement system.
This unit is designed to be installed into an
existing HVAC system. Please read and follow
all service procedures outlined in this manual.
Use only genuine activTek replacement parts
available from your Distributor.
If you have any questions concerning this or any
activTek product, contact your Distributor.
Please record the name and phone number of
your activTek Distributor:
Name __________________________________
Phone _________________________________
Please record the serial number of your
activTek INDUCT 750/2000:
Serial # _________________________________
Features:
Ozone Production:
• 0.02 ppm maximum with standard
replaceable ActivePure® Cell.
• 0.00 ppm with ozone-free
replaceable ActivePure® Cell.
Electrical:
• 100/277 V~ 50/60 HZ
• 0.17A 17watts (INDUCT 750)
• 0.17A 19watts (INDUCT 2000)
Mechanical:
• Distribution via air handler.
Dimensions:
• INDUCT 2000: 9.62" x 9.62" x 11.25"
(24 cm x 24 cm x 28.5 cm.)
• INDUCT 750: 9.62" x 9.62" x 7.48"
(24 cm x 24 cm x 19 cm.)
• Weight: 3 pounds (1.2 kg.)
Operating Temperature:
• < 200˚F
Coverage:
• INDUCT 2000: up to 2000 ft
2
(186 m
• INDUCT 750: up to 750 ft
(229 m
2
Warranty:
• Length of warranty will vary
depending on model.
See warranty card for specific details.
2
CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 2
About activTek INDUCT 750/2000 . . . . . . . 2
Product Contents. . . . . . . . . . . . . . . . . . . . . . . 3
Installation Hardware. . . . . . . . . . . . . . . . . . . 3
Replacement Parts . . . . . . . . . . . . . . . . . . . . . 3
Recommended Installation Tools. . . . . . . . 3
Installation Requirements. . . . . . . . . . . . . . . 4
Metal Ductwork Installation . . . . . . . . . . . . 5
Fiberglass Ductwork Installation . . . . . . . . 6
Maintenance/UV Lamp Indicator. . . . . . . 12
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the ActivePure® Cell . . . . . . . . . 13
Changing the Ballast . . . . . . . . . . . . . . . . . . 14
This owner's manual is also available online at:
http://www.activTek.net.
activTek INDUCT 750/2000 is easily mounted
into the supply side of air conditioning and
heating system air ducts where many problems
can start.
Optional ozone-free units are available with the
same basic components as standard INDUCT
units and an ozone-free bulb.
Note that odor reduction is dependent on low
level ozone. The standard INDUCT products
provide 0.02 ppm or less of ozone. If odor
reduction is required, the standard ActivePure®
Cell is recommended.
WARNING! - UV Light in operation.
Disconnect unit from power supply before
servicing. Failure to follow warnings may
result in severe eye damage and electrical
shock.
Location for Protective Earth Line.
WARNING! - To prevent damage
to the unit, operating environment
temperature must never exceed 200˚F.
2
)
)
2
WARNING! - This unit must be installed
by a licensed HVAC contractor. Failure to
do so will void warranty of the product.
WARNING! - This unit must never be
used with an extension cord.
PRODUCT CONTENTS
Replaceable ActivePure®
Cell (includes UV Lamp)
UV bulb indicator
INSTALLATION HARDWARE
(8) #8 - .75
(4) #6 - 32 X 2 inch
1/4" Self-tapping screws
Threaded bolts
Item # US70679
Item #US70680
REPLACEMENT PARTS
Mounting Plate
INDUCT 750
Item # US70683
ActivePure® Cell
Item # US71114
INDUCT 2000
Standard ActivePure® Cell
Item # US70678
Ozone-Free ActivePure® Cell
Item # US71088
RECOMMENDED INSTALLATION TOOLS
3 1/2" Hole Saw
Drill/Power Driver
Phillips
for wood or metal
(recommended)
Screwdriver
You may also need:
Utility Knife
Tin Snips
Dust Mask
(for metal ductwork)
Mounting
Plate
Safety
Switch
(4) #6 - 32
Toggle bolt wall anchors
(4) #8 - 32
Item # US70682
Hex nuts
Item # US70681
Base Unit
3/8" Drill Bit
11/32" Open-
1/4" Nut Driver
(if installing into fiberglass
ducting with toggle bolts)
End Wrench
Bit
CAUTION: When the unit is
installed in a roof mounted
HVAC system, the unit must be
protected from the elements.
1/4
3