activTek INDUCT 2000 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria activTek INDUCT 2000. activTek INDUCT 2000 9. Electronic air purification system
Anche per activTek INDUCT 2000: Manuale d'uso (16 pagine)

Stampa la pagina

FIBERGLASS DUCTWORK INSTALLATION

Stud

5. Insert (4) 2" Threaded bolts into screw holes at

corners of mounting plate. Attach (4) toggle bolt

anchors to ends of threaded bolts.

7. Insert (4) toggle bolts into 3/8" holes in duct. Be

sure toggle anchors open after inserting.

9. Insert unit into opening. Be sure the air will pass

though the ActivePure® cell honeycomb matrix.

11. Plug unit into working power receptacle. Hard wiring unit into

HVAC system should be done by a licensed HVAC installer or

electrical contractor only.

(CONTINUED)

6. Remove backing from mounting plate

adhesive gasket.

8. Center large opening in mounting plate over

3.5" opening in duct and press plate to duct.

The adhesive gasket will hold the mounting

plate into place.

Tighten toggle bolts - DO NOT OVERTIGHTEN.

10. Secure the unit to the mounting plate with (4)

#8-32 nuts.