Centurion SECTOR II Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Barriere automatiche Centurion SECTOR II. Centurion SECTOR II 19. Rectangular boom pole jack-knife led

Stampa la pagina

SECTION 3

3.2. Boom pole modifications

1. Remove the silicone plug

and plastic bumper from the

rectangular boom pole.

2. Mark and centre punch a hole

position 30mm away from the

end of the Coupling.

Ensure that the hole is

facing the direction of

traffic.

3. Drill one 12mm hole.

The hole must be drilled

through only one wall of

the boom pole.

4. Route the LED harness through

the 12mm hole, making sure that

the cable can reach the end of

the pole.

LED harness

page 9

PHYSICAL INSTALLATION

FIGURE 6

12mm

hole

FIGURE 7

FIGURE 8