- ページ 9
自動バリア Centurion SECTOR IIのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Centurion SECTOR II 19 ページ。 Rectangular boom pole jack-knife led
ページを印刷するSECTION 3
3.2. Boom pole modifications
1. Remove the silicone plug
and plastic bumper from the
rectangular boom pole.
2. Mark and centre punch a hole
position 30mm away from the
end of the Coupling.
Ensure that the hole is
facing the direction of
traffic.
3. Drill one 12mm hole.
The hole must be drilled
through only one wall of
the boom pole.
4. Route the LED harness through
the 12mm hole, making sure that
the cable can reach the end of
the pole.
LED harness
page 9
PHYSICAL INSTALLATION
FIGURE 6
12mm
hole
FIGURE 7
FIGURE 8
www.centsys.com