Garmin G3000 Manuale di istruzioni - Pagina 14
Sfoglia online o scarica il pdf Manuale di istruzioni per Display avionico Garmin G3000. Garmin G3000 18. Swapping gsa80 roll & gsa80 yaw servo on citation cj3+
Section 3
Final Verification / Return to Service
• Review the options that were determined to be installed per section 1.
• Compare that to the tables in Section 4.
o Write the Expected FLEET ID in the table below.
• Turn power on.
• Select Home on either GTC controller.
o Select Utilities.
o Select Setup.
o Select Avionics Status.
o Select the LRU Info tab on the left side.
Verify that all the LRUs are showing green check mark.
o Select the Airframe tab on the left side.
o Verify that the FLEET ID matches the number determined in Section 4 based on
the options installed in the aircraft.
EXPECTED FLEET ID (from Section 4 of this document)
Ensure that the Expected and Actual FLEET IDs match.
o Select the MSG button:
Verify there is no DB Mismatch message present.
Verify there is no Manifest message present.
Verify there is no Config message present.
Version 1.0
REFERENCE ONLY
REFERENCE ONLY
ACTUAL FLEET ID
14