Garmin G3000 Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Pantalla de aviónica Garmin G3000. Garmin G3000 18 páginas. Swapping gsa80 roll & gsa80 yaw servo on citation cj3+

Imprimir página
Garmin G3000 Manual de instrucciones
Section 3

Final Verification / Return to Service

• Review the options that were determined to be installed per section 1.
• Compare that to the tables in Section 4.
o Write the Expected FLEET ID in the table below.
• Turn power on.
• Select Home on either GTC controller.
o Select Utilities.
o Select Setup.
o Select Avionics Status.
o Select the LRU Info tab on the left side.
 Verify that all the LRUs are showing green check mark.
o Select the Airframe tab on the left side.
o Verify that the FLEET ID matches the number determined in Section 4 based on
the options installed in the aircraft.
EXPECTED FLEET ID (from Section 4 of this document)
 Ensure that the Expected and Actual FLEET IDs match.
o Select the MSG button:
 Verify there is no DB Mismatch message present.
 Verify there is no Manifest message present.
 Verify there is no Config message present.
Version 1.0
REFERENCE ONLY
REFERENCE ONLY
ACTUAL FLEET ID
14