Garmin GTS 8000 Sostituzione - Pagina 8

Sfoglia online o scarica il pdf Sostituzione per Display avionico Garmin GTS 8000. Garmin GTS 8000 16. For citation m2, garmin g3000 software version 10
Anche per Garmin GTS 8000: Manuale del pilota (26 pagine)

Stampa la pagina
Garmin GTS 8000 Sostituzione
Section 4

Final Verification / Return to Service

Note: This is with the G3000 powered up in normal mode.
• Determine options installed using Appendix A.
• Select Home on the left GTC controller.
o Select Utilities.
o Select Setup.
o Select Avionics Status.
o Select the Airframe tab on the left side.
o Verify that the configuration ID (CRC Number) matches the number determined in
Appendix B based on the options installed in the aircraft.
o Select the LRU Info tab on the left side.
 Verify that all the LRUs are showing green check mark.
o Select the MSG button:
 Verify there is no DB Mismatch message present.
 Verify there is no Manifest message present.
 Verify there is no Config message present.
• If the initial radar trims were not zero:
o Select Home on the left GTC controller.
o Select Aircraft Systems.
o Select Maintenance.
o Enter password CACCDMS.
o Select Radar Trim.
Return to Service Testing
For testing, complete section 7.17.1 in the Garmin G3000 LMM.
•
Version 1.0
Enter the Pitch and Roll trims recorded in section 1.
8