Garmin GTS 8000 Substituição - Página 8
Procurar online ou descarregar pdf Substituição para Ecrã de aviónica Garmin GTS 8000. Garmin GTS 8000 16 páginas. For citation m2, garmin g3000 software version 10
Também para Garmin GTS 8000: Manual do Piloto (26 páginas)

Section 4
Final Verification / Return to Service
Note: This is with the G3000 powered up in normal mode.
• Determine options installed using Appendix A.
• Select Home on the left GTC controller.
o Select Utilities.
o Select Setup.
o Select Avionics Status.
o Select the Airframe tab on the left side.
o Verify that the configuration ID (CRC Number) matches the number determined in
Appendix B based on the options installed in the aircraft.
o Select the LRU Info tab on the left side.
Verify that all the LRUs are showing green check mark.
o Select the MSG button:
Verify there is no DB Mismatch message present.
Verify there is no Manifest message present.
Verify there is no Config message present.
• If the initial radar trims were not zero:
o Select Home on the left GTC controller.
o Select Aircraft Systems.
o Select Maintenance.
o Enter password CACCDMS.
o Select Radar Trim.
Return to Service Testing
For testing, complete section 7.17.1 in the Garmin G3000 LMM.
•
Version 1.0
Enter the Pitch and Roll trims recorded in section 1.
8