Garmin Reactor 40 Manuale di istruzioni per l'installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Attrezzatura marina Garmin Reactor 40. Garmin Reactor 40 25. Mechanical
Anche per Garmin Reactor 40: Manuale di istruzioni per l'installazione (11 pagine), Manuale di istruzioni per l'installazione (13 pagine), Manuale di istruzioni per l'installazione (29 pagine), Manuale di configurazione (8 pagine)

Tools and Supplies Needed

• Safety glasses

• Drill and drill bits

• Wrenches

• Jigsaw or a rotary cutting tool (for installing an optional helm control)

• Wire cutters/strippers

• Phillips and flat screwdrivers

• Cable ties

• Solder and water-tight heat shrink tubing or water-tight, heat-shrink, butt-splice connectors

• Dielectric grease

• Marine sealant

• Marine corrosion inhibitor spray

• Portable or handheld compass (to test for magnetic interference)

• Hydraulic hose with machine-crimped or field-replaceable fittings that have a minimum rating of 1000 psi

• Hydraulic T-fittings

• Hydraulic fluid

• Thread sealant

• Hydraulic bleeding equipment

NOTE: Mounting screws are provided for the main components of the autopilot system. If the provided screws

are not appropriate for the mounting surface, you must provide the correct types of screws.

Power and Data Layout

WARNING

When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or

product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product

specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product

warranty.