Brother DCP-9040CN Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Stampante Brother DCP-9040CN. Brother DCP-9040CN 10. Facsimile equipment
Anche per Brother DCP-9040CN: Opuscolo e specifiche (4 pagine), Manuale di configurazione rapida (30 pagine), Manuale (7 pagine), Elenco di riferimento delle parti (43 pagine), Manuale di configurazione rapida (31 pagine), Pulizia e cura (7 pagine), Manuale di configurazione rapida (20 pagine)

DCP9040CN, DCP9045CDN, MFC9440CN & MFC9840CDW

IMPORTANT! READ THIS PROCEDURE IN ITS ENTIRETY BEFORE ATTEMPTING THE PROCEDURE.

UNSUCCESSFUL REPAIR OR DAMAGE MAY RESULT FROM IMPROPER INSTALLATION.

Symptom:

Customer reports a "NO PAPER FED" message when attempting to feed paper from cassette and/or hears a

"popping" noise when attempting to feed paper and the paper does not leave the paper tray.

Possible cause:

The paper (PE) actuator is stuck in the wrong position and or there is damage to the paper feed frame unit.

PE Actuator is in the

Recommendation:

Replace the paper feed frame unit.

PAPER FEED FRAME ASSEMBLY – REMOVAL

Remove the consumables:

1. Power off the machine and disconnect the power cord. Remove the paper tray from the machine.

2. Open the front door. Remove the drum/toners, belt unit and the waste toner pack (both located under the

drum unit). Important – place the drum unit on a flat surface and protect the drum unit from excessive

bright light.

Remove the outer covers:

1. Remove the two screws securing the back cover. Remove the back cover.

NO PAPER FEED Message, Clicking Noise

March 3, 2008

No paper fed

noise.wav

incorrect

position

Page 1 of 10

SERVICE

UPDATE No.

PE Actuator is in the

correct

position

F1249