Fujitsu M4099D Procedure di installazione - Pagina 3

Sfoglia online o scarica il pdf Procedure di installazione per Scanner Fujitsu M4099D. Fujitsu M4099D 3. A3 duplex document scanner
Anche per Fujitsu M4099D: Manuale delle procedure di installazione (7 pagine), Manuale delle procedure di installazione (9 pagine), Opuscolo (2 pagine), Procedure di installazione (3 pagine), Procedure di installazione (3 pagine), Opuscolo e specifiche (2 pagine), Opuscolo e specifiche (2 pagine), Scheda tecnica (2 pagine), Istruzioni per la pulizia (2 pagine)

Fujitsu Video Scanner Installation Procedures

Finally connect the power cord to the scanner and a wall outlet then turn on the scanner.

For those models without a power switch plug in the power supply to the back of the

scanner. To establish communication between the Scanner and your PC system turn on

the scanner prior to turning on your system. The scanner power and LED/LCD display

will light up. Next after the scanner completes its startup initialization the LED/LCD will

display either ready or the number one. This indicates that the scanner is ready.

Special note: On video scanners the ready light will not come on.

Step E: Configuring the scanner driver.

1. Go to Start, Settings, Control Panel, and double click on KSM (Kofax Source

Manager).

2. Click on Next then click on Create and type in a source name (typically the scanner

model).

3. Click on the drop down menu and select Adrenaline in the Source type and click

O.K. On the next screen Select your model scanner on the list and click O.K. to

finish.

Step F: Scanning with VCDEMO32P.

1. Go to Start, Programs, Kofax VRS or Kofax Image Controls, and select

VCDEMO32P.EXE.

2. Next go to Source, Scanner, and click on the drop down arrow; then select the

source that you created in the KSM. Wait a couple of seconds for the Kofax engine

to load, and then place your documents in the scanner.

3. Now go to Source, Properties and select your scanning parameters (i.e. scan

source - Flatbed or ADF, resolution, paper size).

4. Afterwards go to Source, and click on Process Image for single page scans or

Process Batch for multi-page batch scans.

Congratulations! You have successfully completed and tested your scanner installation.

*If you do not have any unzipping software installed on your system, you can download a free

evaluation copy at www.winzip.com.

Rev051806A

Windows 98SE\ME\2000\XP

Page 3 of 3