Allied Telesis Rapier AR 700 Series Come fare

Sfoglia online o scarica il pdf Come fare per Router di rete Allied Telesis Rapier AR 700 Series. Allied Telesis Rapier AR 700 Series 8. How to set up pppoe between a linux client and access concentrator
Anche per Allied Telesis Rapier AR 700 Series: Come configurare (6 pagine), Manuale di risoluzione dei problemi (8 pagine), Risoluzione dei problemi (5 pagine), Manuale di installazione rapida (13 pagine)

Allied Telesis Rapier AR 700 Series Come fare
How To |
Set Up PPPoE Between a Linux Client and an Allied Telesis
Access Concentrator
Introduction
This document describes how to set up PPPoE between a Linux client and an Allied Telesis
device.
What information you will find in this document
This document is divided into the following sections:
Configuring your Allied Telesis Device‚ page 2
Configuring Your Linux Device‚ page 3
Starting the Link‚ page 4
Debugging and Verifying‚ page 5
Other Hints‚ page 6
Which products and software versions does this information apply to?
Products:
Rapier, AT-8800, AT-8900, AT-9900, AT-9800 and SwitchBlade series switches
AR400 and AR700 series routers
Software versions: 2.7.1 and later
C613-16074-00 REV B
www.alliedtelesis.com