Allied Telesis Rapier AR 700 Series Jak to zrobić

Przeglądaj online lub pobierz pdf Jak to zrobić dla Router sieciowy Allied Telesis Rapier AR 700 Series. Allied Telesis Rapier AR 700 Series 8 stron. How to set up pppoe between a linux client and access concentrator
Również dla Allied Telesis Rapier AR 700 Series: Jak skonfigurować (6 strony), Instrukcja rozwiązywania problemów (8 strony), Rozwiązywanie problemów (5 strony), Podręcznik szybkiej instalacji (13 strony)

How To |

Set Up PPPoE Between a Linux Client and an Allied Telesis

Access Concentrator

Introduction

This document describes how to set up PPPoE between a Linux client and an Allied Telesis

device.

What information you will find in this document

This document is divided into the following sections:

•

Configuring your Allied Telesis Device‚ page 2

•

Configuring Your Linux Device‚ page 3

•

Starting the Link‚ page 4

•

Debugging and Verifying‚ page 5

•

Other Hints‚ page 6

Which products and software versions does this information apply to?

•

Products:

Rapier, AT-8800, AT-8900, AT-9900, AT-9800 and SwitchBlade series switches

AR400 and AR700 series routers

•

Software versions: 2.7.1 and later

C613-16074-00 REV B