Allied Telesis Rapier AR 700 Series Como fazer
Procurar online ou descarregar pdf Como fazer para Router de rede Allied Telesis Rapier AR 700 Series. Allied Telesis Rapier AR 700 Series 8 páginas. How to set up pppoe between a linux client and access concentrator
Também para Allied Telesis Rapier AR 700 Series: Como configurar (6 páginas), Manual de resolução de problemas (8 páginas), Resolução de problemas (5 páginas), Manual de instalação rápida (13 páginas)
Imprimir página
How To |
Set Up PPPoE Between a Linux Client and an Allied Telesis
Access Concentrator
Introduction
This document describes how to set up PPPoE between a Linux client and an Allied Telesis
device.
What information you will find in this document
This document is divided into the following sections:
•
Configuring your Allied Telesis Device‚ page 2
•
Configuring Your Linux Device‚ page 3
•
Starting the Link‚ page 4
•
Debugging and Verifying‚ page 5
•
Other Hints‚ page 6
Which products and software versions does this information apply to?
•
Products:
Rapier, AT-8800, AT-8900, AT-9900, AT-9800 and SwitchBlade series switches
AR400 and AR700 series routers
•
Software versions: 2.7.1 and later
C613-16074-00 REV B
www.alliedtelesis.com