Dell PowerEdge 2800 Conversione Manualline - Pagina 16

Sfoglia online o scarica il pdf Conversione Manualline per Server Dell PowerEdge 2800. Dell PowerEdge 2800 36. Poweredge 2800 server
Anche per Dell PowerEdge 2800: Aggiornamento delle informazioni (24 pagine), Manuale di installazione (22 pagine), Manuale (44 pagine), Installazione dell'hardware (14 pagine), Riferimento rapido (2 pagine), Specifiche tecniche (2 pagine)

Y1001bk0.book Page 14 Thursday, July 8, 2004 4:32 PM

Figure 1-6. Removing/Installing the Control Panel Assembly and Front Panel

screws (3)

T-10 Torx

screws (22)

Using a T-10 Torx driver, remove the 22 screws that secure the tower front panel to the drive

tray. See Figure 1-6.

Installing the Rack Front Panel and Control Panel Assembly

Install the rack front panel

Orient the system as shown in Figure 1-6.

Using a T-10 Torx driver, install the 22 screws (that came in your kit) that secure the rack

front panel to the drive tray.

NOTE:

rack systems. Only the carrier is different. When converting your tower system to a rack system, you must

remove the LCD board and the I/O board from the control panel assembly that you removed in step 2 of

"Removing the Control Panel Assembly and Tower Front Panel."

Tower-to-Rack and Rack-to-Tower Conversion Guide

control panel

cable clamp

The control panel assembly's LCD board and the I/O board are the same for both the tower and

drive tray in

maintenance

position

front panel

control panel

assembly