Dell PowerEdge 2800 Conversione Manualline - Pagina 18
Sfoglia online o scarica il pdf Conversione Manualline per Server Dell PowerEdge 2800. Dell PowerEdge 2800 36. Poweredge 2800 server
Anche per Dell PowerEdge 2800: Aggiornamento delle informazioni (24 pagine), Manuale di installazione (22 pagine), Manuale (44 pagine), Installazione dell'hardware (14 pagine), Riferimento rapido (2 pagine), Specifiche tecniche (2 pagine)
Stampa la pagina
Y1001bk0.book Page 16 Thursday, July 8, 2004 4:32 PM
Removing the Trim Panel
Remove the trim panel.
Lay the system on its cover as shown in Figure 1-7.
a
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the three screws from the
b
side of the trim panel. See Figure 1-7.
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the two screws from the
c
back of the system.
Slide the trim panel backward and then remove the trim panel from the chassis.
d
Figure 1-7. Removing the Trim Panel
Install the six shoulder nuts as shown in Figure 1-8.
NOTE:
the side.
The system is ready to install in the rack.
16
Tower-to-Rack and Rack-to-Tower Conversion Guide
Ensure that the shoulder nuts are tightened so that the shoulder of the nut is tight against
hex-head Phillips
screws (2)
hex-head Phillips
screws (3)