Dell PowerEdge 2800 Omzetting Manuallijn - Pagina 18
Blader online of download pdf Omzetting Manuallijn voor {categorie_naam} Dell PowerEdge 2800. Dell PowerEdge 2800 36 pagina's. Poweredge 2800 server
Ook voor Dell PowerEdge 2800: Informatie-update (24 pagina's), Installatiehandleiding (22 pagina's), Handmatig (44 pagina's), Hardware-installatie (14 pagina's), Snelle referentie (2 pagina's), Specificaties (2 pagina's)
Pagina afdrukken
Y1001bk0.book Page 16 Thursday, July 8, 2004 4:32 PM
Removing the Trim Panel
Remove the trim panel.
Lay the system on its cover as shown in Figure 1-7.
a
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the three screws from the
b
side of the trim panel. See Figure 1-7.
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the two screws from the
c
back of the system.
Slide the trim panel backward and then remove the trim panel from the chassis.
d
Figure 1-7. Removing the Trim Panel
Install the six shoulder nuts as shown in Figure 1-8.
NOTE:
the side.
The system is ready to install in the rack.
16
Tower-to-Rack and Rack-to-Tower Conversion Guide
Ensure that the shoulder nuts are tightened so that the shoulder of the nut is tight against
hex-head Phillips
screws (2)
hex-head Phillips
screws (3)