Dell PowerEdge 2800 Dönüşüm Manualline - Sayfa 18
Sunucu Dell PowerEdge 2800 için çevrimiçi göz atın veya pdf Dönüşüm Manualline indirin. Dell PowerEdge 2800 36 sayfaları. Poweredge 2800 server
Ayrıca Dell PowerEdge 2800 için: Bilgi Güncellemesi (24 sayfalar), Kurulum Kılavuzu (22 sayfalar), Manuel (44 sayfalar), Donanım Kurulumu (14 sayfalar), Hızlı Referans (2 sayfalar), Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
Y1001bk0.book Page 16 Thursday, July 8, 2004 4:32 PM
Removing the Trim Panel
Remove the trim panel.
Lay the system on its cover as shown in Figure 1-7.
a
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the three screws from the
b
side of the trim panel. See Figure 1-7.
Using a #2 Phillips screwdriver or 1/4-inch nut driver, remove the two screws from the
c
back of the system.
Slide the trim panel backward and then remove the trim panel from the chassis.
d
Figure 1-7. Removing the Trim Panel
Install the six shoulder nuts as shown in Figure 1-8.
NOTE:
the side.
The system is ready to install in the rack.
16
Tower-to-Rack and Rack-to-Tower Conversion Guide
Ensure that the shoulder nuts are tightened so that the shoulder of the nut is tight against
hex-head Phillips
screws (2)
hex-head Phillips
screws (3)