Miele DA 1160 Istruzioni per l'uso e l'installazione - Pagina 22

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele DA 1160. Miele DA 1160 40. Built-under ventilation hood
Anche per Miele DA 1160: Informazioni (4 pagine), Istruzioni per l'uso e l'installazione (32 pagine), Istruzioni per l'uso e l'installazione (32 pagine)

Cleaning and care

Changing a lamp

The halogen lamps become very hot

during operation.

They can cause burns even after

being switched off for some time.

Allow them to cool down for a few

minutes before changing them.

 Disconnect the rangehood from the

mains electrical supply before

replacing the lamps (see "Warning

and Safety instructions").

 Remove the grease filters.

 Loosen the lamp's securing screw a

little.

 Slide the screw and the lamp

downwards.

 Then tighten the screw again.

 Turn the halogen lamp anti-clockwise

and pull it out.

 Replace it with a new lamp of the

same type: GU/GZ 10, 230 V, 50W.

Refit the lamp by reversing the steps

shown above. Please observe

manufacturer's instructions.

 Refit the grease filters.