Miele DA 1160 Bedienings- en installatie-instructies - Pagina 22

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 1160. Miele DA 1160 40 pagina's. Built-under ventilation hood
Ook voor Miele DA 1160: Informatie (4 pagina's), Bedienings- en installatie-instructies (32 pagina's), Bedienings- en installatie-instructies (32 pagina's)

Cleaning and care

Changing a lamp

The halogen lamps become very hot

during operation.

They can cause burns even after

being switched off for some time.

Allow them to cool down for a few

minutes before changing them.

 Disconnect the rangehood from the

mains electrical supply before

replacing the lamps (see "Warning

and Safety instructions").

 Remove the grease filters.

 Loosen the lamp's securing screw a

little.

 Slide the screw and the lamp

downwards.

 Then tighten the screw again.

 Turn the halogen lamp anti-clockwise

and pull it out.

 Replace it with a new lamp of the

same type: GU/GZ 10, 230 V, 50W.

Refit the lamp by reversing the steps

shown above. Please observe

manufacturer's instructions.

 Refit the grease filters.