Miele DA 1160 작동 및 설치 지침 - 페이지 22
{카테고리_이름} Miele DA 1160에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 1160 40 페이지. Built-under ventilation hood
Miele DA 1160에 대해서도 마찬가지입니다: 정보 (4 페이지), 작동 및 설치 지침 (32 페이지), 작동 및 설치 지침 (32 페이지)
페이지 인쇄
Cleaning and care
Changing a lamp
The halogen lamps become very hot
during operation.
They can cause burns even after
being switched off for some time.
Allow them to cool down for a few
minutes before changing them.
Disconnect the rangehood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
22
Remove the grease filters.
Loosen the lamp's securing screw a
little.
Slide the screw and the lamp
downwards.
Then tighten the screw again.
Turn the halogen lamp anti-clockwise
and pull it out.
Replace it with a new lamp of the
same type: GU/GZ 10, 230 V, 50W.
Refit the lamp by reversing the steps
shown above. Please observe
manufacturer's instructions.
Refit the grease filters.