HP 200-5250 Come iniziare - Pagina 14

Sfoglia online o scarica il pdf Come iniziare per Desktop HP 200-5250. HP 200-5250 24. Hp 200-5250: user guide

Symptom

Possible solution

No sound is

For Windows 7:

produced.

If you use an HDMI connector on the graphics card (select models only) to connect your monitor

to the computer, you should also connect analog speakers to the computer Audio Line Out

connector if you want to hear sound during the initial setup of the computer. Refer to the Setup

Poster to connect analog speakers.

If you are using built-in monitor speakers, use the monitor front-panel Volume button to adjust

volume. Use the front-panel buttons to enter the onscreen display (OSD) and ensure that audio is

enabled and that the volume is set appropriately.

Ensure that you connected powered (active) speakers and that they are turned on.

Turn off your computer, and then unplug and reconnect the speakers. Ensure that the speakers

are connected to an audio connector, not a Line In or headphone connector.

To resume from Sleep mode, press the Sleep button (select models only), or press Esc.

Unplug headphones if they are connected to your computer (or speaker system).

Internet access

Symptom

Internet programs

do not start

automatically.

I cannot connect to

the Internet.

Chapter 3 Troubleshooting and maintenance

Click the Start button, click Control Panel, click Action Center, and then click

Troubleshooting.

Under Hardware and Sound, click Troubleshoot and audio playback.

Possible solution

For Windows 7:

Click the Start button, click Control Panel, click Action Center, and then click

Troubleshooting.

Under Network and Internet, click Connect to the Internet.

Verify that you are using the proper cables for your Internet connection type. Your computer

might have a dial-up modem and an Ethernet network adapter (also called a network interface

card, or NIC). A modem uses a standard telephone cable, whereas the network adapter uses

a network cable, to connect to a local area network (LAN). Do not connect a telephone cable

to the network adapter, and do not plug a network cable into a telephone service line; doing

so might damage the network adapter.

ENWW