Alloy LED PrimaLine Neon 200 TB Istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Apparecchiature di illuminazione Alloy LED PrimaLine Neon 200 TB. Alloy LED PrimaLine Neon 200 TB 5. 24v led tape light

Stampa la pagina

f) Slide the white metal sleeve over the metal clamp to lock the

connection into place. The notches on the connector and metal

clamp should fit into the grooves of the white metal sleeve.

g) Slide the clear plastic cover over the white metal sleeve and tape

light to seal the connection.

2. Attach the DIY end cap to the opposite end of the

tape light.

Thread the clear cover onto the the end of the tape

light with the lip-end first.

Place the end cap in the same orientation as the

connector, and secure it to the tape light using the

metal clamp and sleeve in the same fashion.

www.AlloyLED.com

page 4 of 5

Installation Instructions

Call: 800.910.LEDS [5337]

Specifications subject to change without notice.

Text: 510.400.6690

[email protected]