CIPTA PERNIKA NUSANTARA SMART VMS Istruzioni per il dispositivo - Pagina 5
Sfoglia online o scarica il pdf Istruzioni per il dispositivo per Attrezzatura per la nautica CIPTA PERNIKA NUSANTARA SMART VMS. CIPTA PERNIKA NUSANTARA SMART VMS 6.
Anche per CIPTA PERNIKA NUSANTARA SMART VMS: Manuale (3 pagine)
NOT OK
EMI
EMI (Electromagnetic Interference) from engine components
2.2. Antenna cable installation on device
After antenna and cable installed, next is install SBD and GPS antenna(picture 4
and 5) to Armada device (picture 1). Warning: Do not connect it reverse.
2.3. Devices Placement
Device position (picture 1) that have LED facing the front (if device on table), if it's
on the wall power and cable must facing down. Make sure device position
avoid water, and SOS button easy to reach.
3. Turn on Devices
3.1. Fuse Installation on the device
Insert the fuse (Gambar 3) to the device at the fuse holder, make sure device
already got signal GPS and SBD signal corresponding in the operator manual, if
not get signal check again connection GPS and SBD cable
*Fuse installation will make POWER LED lit orange/amber
Fuse
BETTER
Device Installation
BEST
GOOD
Fuse
4