CIPTA PERNIKA NUSANTARA SMART VMS Інструкція до пристрою - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція до пристрою для Човнове спорядження CIPTA PERNIKA NUSANTARA SMART VMS. CIPTA PERNIKA NUSANTARA SMART VMS 6 сторінок.
Також для CIPTA PERNIKA NUSANTARA SMART VMS: Посібник (3 сторінок)

Друкувати сторінку

NOT OK

EMI

EMI (Electromagnetic Interference) from engine components

2.2. Antenna cable installation on device

After antenna and cable installed, next is install SBD and GPS antenna(picture 4

and 5) to Armada device (picture 1). Warning: Do not connect it reverse.

2.3. Devices Placement

Device position (picture 1) that have LED facing the front (if device on table), if it's

on the wall power and cable must facing down. Make sure device position

avoid water, and SOS button easy to reach.

3. Turn on Devices

3.1. Fuse Installation on the device

Insert the fuse (Gambar 3) to the device at the fuse holder, make sure device

already got signal GPS and SBD signal corresponding in the operator manual, if

not get signal check again connection GPS and SBD cable

*Fuse installation will make POWER LED lit orange/amber

Fuse

BETTER

Device Installation

BEST

GOOD

Fuse