Creek Audio EVOLUTION 50A Istruzioni per l'utente - Pagina 3
Sfoglia online o scarica il pdf Istruzioni per l'utente per Amplificatore Creek Audio EVOLUTION 50A. Creek Audio EVOLUTION 50A 8. Integrated amplifier
Anche per Creek Audio EVOLUTION 50A: Manuale di istruzioni (13 pagine), Manuale di istruzioni (17 pagine)
Stampa la pagina
While dedicated Remote APPs may offer flexible options to navigate and play your computer-based
music library, Creek have programmed the RUBY to have certain HID functions (Human Interface).
Using the EVOLUTION remote handset, it is possible to Play, Stop, Pause or force tracks forward and
backwards. This limited functionality is not displayed on the EVOLUTION product, so it is no
substitute for having a monitor or display connected to your computer, or a remote APP running on
a handheld device, such as a smart phone or tablet, to navigate more easily.
Bluetooth
The RUBY's Bluetooth module will be inside the amplifier's metal case, so it is effectively shielded
and cannot receive wireless BT signals unless a short antenna screwed into the golden F socket #6.
Please find the short black antenna supplied in the packaging and screw it into the socket. It can be
then bent into a position to allow other cables to pass without obstruction.
The RUBY has a Bluetooth receiver that can receive music signals from various devices. It is first
necessary to look at the settings of your source device, such as a smart phone or tablet, to search for
the appropriate BT device. When you see the EVOLUTION Bluetooth device listed, select it and it will
be remembered on that device. If required, the smart device can also be made to forget the
EVOLUTION BT if required. Normally, if the amplifier's input selector is set for BT input, it will allow
the RUBY to pair with the chosen device and enabled it to pass music signals, up to a distance of 10 –
15 metres. Buildings will have different construction techniques, so depending on the materials
used and the amount of obstructions in the way, reception distance may be either greater or
shorter. Other wireless devices operating on or near the BT frequency may also affect the reliability
of signal reception.
FM radio
GETTING STARTED IN YOUR REGION
As you may be operating the Receiver in a region of the world where the radio standards are
different from the factory setting, it is necessary to manually select the correct, or most appropriate
region first. Power-OFF the Receiver; Press and hold the MENU button and then press the POWER
button to turn the Receiver-ON again. When the OLED display lights-up and the CREEK logo
disappears, release the MENU button and the display will show a Set-Up menu, including Broadcast
Region. Rotate the left-hand control knob, to select Broadcast Region. Press the knob once, to show
all the available regions. Select your region with the control knob and press it once again. To return
to normal operation, press the MENU button once more. After a couple of seconds delay the amp
will work with the correct settings for your region.
EVOLUTION 50A and 100A FRONT PANEL CONTROLS & OPERATION
Page 3