Cisco 1503 Manuale del software - Pagina 9

Sfoglia online o scarica il pdf Manuale del software per Interruttore Cisco 1503. Cisco 1503 49. Cisco systems switch user manual

Configuring IP and SNMP Parameters

The illustration below shows the network that is being configured in this section:

Figure 3-2

Server

Note

for your network. You should substitute them with the IP addresses that apply to your

network devices.

Step 1

Step 2

Example Network

Micro Hub 1503

The network addresses used in the steps below are examples only; they will not work

Use the ip address command to configure the hub's IP address, subnet mask,

and gateway address:

Hub# ip address 172.16.10.2 255.255.255.0 172.16.10.1

Use the snmp community command to configure the SNMP communities and

their options:

Hub# snmp community 1 private rw

Configuring IP and SNMP Parameters

Router A

SNMP network

management station

Using Your Hub Software 3-9