Cisco 1503 Software Handleiding - Pagina 9

Blader online of download pdf Software Handleiding voor {categorie_naam} Cisco 1503. Cisco 1503 49 pagina's. Cisco systems switch user manual

Configuring IP and SNMP Parameters

The illustration below shows the network that is being configured in this section:

Figure 3-2

Server

Note

for your network. You should substitute them with the IP addresses that apply to your

network devices.

Step 1

Step 2

Example Network

Micro Hub 1503

The network addresses used in the steps below are examples only; they will not work

Use the ip address command to configure the hub's IP address, subnet mask,

and gateway address:

Hub# ip address 172.16.10.2 255.255.255.0 172.16.10.1

Use the snmp community command to configure the SNMP communities and

their options:

Hub# snmp community 1 private rw

Configuring IP and SNMP Parameters

Router A

SNMP network

management station

Using Your Hub Software 3-9