- ページ 9

スイッチ Cisco 1503のPDF ソフトウェアマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 1503 49 ページ。 Cisco systems switch user manual

ページを印刷する
Cisco 1503 ソフトウェアマニュアル
Configuring IP and SNMP Parameters
The illustration below shows the network that is being configured in this section:
Figure 3-2
Server
Note
for your network. You should substitute them with the IP addresses that apply to your
network devices.
Step 1
Step 2
Example Network
PC
PC
Micro Hub 1503
The network addresses used in the steps below are examples only; they will not work
Use the ip address command to configure the hub's IP address, subnet mask,
and gateway address:
Hub# ip address 172.16.10.2 255.255.255.0 172.16.10.1
Use the snmp community command to configure the SNMP communities and
their options:
Hub# snmp community 1 private rw
Configuring IP and SNMP Parameters
PC
E0
Router A
E1
SNMP network
management station
Using Your Hub Software 3-9