Siemens SINUMERIK 808D Manuale di servizio - Pagina 41

Sfoglia online o scarica il pdf Manuale di servizio per Apparecchiature industriali Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 48. Connecting with v60 driver
Anche per Siemens SINUMERIK 808D: Manuale di istruzioni per l'uso (34 pagine), Manuale di servizio (46 pagine), Istruzioni (2 pagine), Manuale di installazione (48 pagine)

Remedy

Check whether the chuck control key on the MCP is activated (the indicator is

•

lit).

Check whether the workpiece is clamped in the chuck on the machine.

•

Check the interface X102 on the back of the PPU for the following:

•

–

Whether the connection of pin 5 is loose/broken

–

Whether pin 10 is connected to 0 V properly

4.3.2

Alarm 700017

Alarm description

No chuck operation is allowed when the spindle or the part program is running.

PLC information

PLC address: DB1600.DBX2.1

Subroutine: MAIN (OB1)

Remedy

Press this key on the PPU to cancel the alarm, and the program will continue.

You can also press this key on the MCP to cancel the alarm.

Note: The program execution is also reset in this case.

4.3.3

Alarm description

This alarm appears because the turret motor is overloaded, and the turret function cannot be used normally. In this case, all

operations are not available.

PLC information

PLC address: DB1600.DBX2.6

Subroutine: MAIN (OB1)

Remedy

● Check whether the overload protection switch of the turret motor works.

● Check the interface X102 on the back of the PPU for the following:

–

Whether the connection of pin 2 is loose/broken

–

Whether pin 10 is connected to 0 V properly

Service Manual

01/2017