Siemens SINUMERIK 808D Manuale di servizio - Pagina 42

Sfoglia online o scarica il pdf Manuale di servizio per Apparecchiature industriali Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 48. Connecting with v60 driver
Anche per Siemens SINUMERIK 808D: Manuale di istruzioni per l'uso (34 pagine), Manuale di servizio (46 pagine), Istruzioni (2 pagine), Manuale di installazione (48 pagine)

4.3.4

Alarm 700023

Alarm description

The program is incorrect. The programmed tool position number is larger than the maximum tool position number.

PLC information

PLC address: DB1600.DBX2.7

Subroutine: MAIN (OB1)

Remedy

Check the content of the part program, and edit the program according to the actual number of tools created.

4.3.5

Alarm description

The maximum number of tools is not set properly (should be set to 4 or 6) on the control system.

PLC information

PLC address: DB1600.DBX3.0

Subroutine: MAIN (OB1)

Remedy

Check whether the setting of MD14510[20] (max. tool number) is correct.

4.3.6

Alarm description

No position signals can be detected from the turret.

PLC information

PLC address: DB1600.DBX3.1

Subroutine: MAIN (OB1)

Remedy

● Check the turret encoder to see whether the turret signal interface is damaged.

● Check whether the turret has fault.

● Check the corresponding I/O interface on the back of the PPU for the following:

–

Whether the connections are disconnected/broken

–

Whether the terminals are damaged/loose

–

Whether pin 10 is connected to 0 V properly

Service Manual

01/2017