Siemens SIPART PS2 Manuale di installazione dell'hardware - Pagina 13

Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Apparecchiature industriali Siemens SIPART PS2. Siemens SIPART PS2 30. Mounting bracket kit
Anche per Siemens SIPART PS2: Istruzioni per l'installazione (4 pagine), Manuale di istruzioni per l'uso (28 pagine), Istruzioni per l'installazione (4 pagine), Descrizione tecnica (26 pagine), Istruzioni per l'uso compatte (35 pagine), Istruzioni per l'installazione del kit (9 pagine), Istruzioni per l'installazione (11 pagine)

Installing/mounting

3.1

3.1.1

Improper commissioning

These instructions are valid solely for the installation and commissioning of the Booster.

It is absolutely necessary that you follow the safety rules, notes and requirements of the

compact operating instructions before assembly, commissioning and also during operation

of the positioner. You can find the compact operating instructions on the supplied CD or on

the Internet under: http://www.siemens.com/processinstrumentation/documentation

(http://www.siemens.com/processinstrumentation/documentation)

High operating force with pneumatic actuators

Risk of injury when working on control valves due to the high operating force of the

pneumatic actuator.

• Please observe the corresponding safety instructions for the pneumatic actuator in use.

Lever for position detection

Danger of crushing and shearing with mounting kits which use a lever for position detection.

During commissioning and ongoing operation, severing or squeezing of limbs could occur

as a result of the lever. Risk of injury when working on control valves due to the high

operating force of the pneumatic actuator.

• Do not reach into the range of motion of the lever following mounting of the positioner

Venting Gauge Block Installation Instructions

Hardware Installation Manual, 12/2014, A5E34388399-AD

WARNING

and mounting kit.