Siemens SIPART PS2 Manual de instalación del hardware - Página 13

Navegue en línea o descargue pdf Manual de instalación del hardware para Equipamiento industrial Siemens SIPART PS2. Siemens SIPART PS2 30 páginas. Mounting bracket kit
También para Siemens SIPART PS2: Instrucciones de instalación (4 páginas), Manual de instrucciones (28 páginas), Instrucciones de instalación (4 páginas), Descripción técnica (26 páginas), Instrucciones de uso Compact (35 páginas), Instrucciones de instalación del kit (9 páginas), Instrucciones de instalación (11 páginas)

Installing/mounting

3.1

3.1.1

Improper commissioning

These instructions are valid solely for the installation and commissioning of the Booster.

It is absolutely necessary that you follow the safety rules, notes and requirements of the

compact operating instructions before assembly, commissioning and also during operation

of the positioner. You can find the compact operating instructions on the supplied CD or on

the Internet under: http://www.siemens.com/processinstrumentation/documentation

(http://www.siemens.com/processinstrumentation/documentation)

High operating force with pneumatic actuators

Risk of injury when working on control valves due to the high operating force of the

pneumatic actuator.

• Please observe the corresponding safety instructions for the pneumatic actuator in use.

Lever for position detection

Danger of crushing and shearing with mounting kits which use a lever for position detection.

During commissioning and ongoing operation, severing or squeezing of limbs could occur

as a result of the lever. Risk of injury when working on control valves due to the high

operating force of the pneumatic actuator.

• Do not reach into the range of motion of the lever following mounting of the positioner

Venting Gauge Block Installation Instructions

Hardware Installation Manual, 12/2014, A5E34388399-AD

WARNING

and mounting kit.