Siemens SITRANS RD500 Manuale di istruzioni per l'uso - Pagina 39

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Interruttore Siemens SITRANS RD500. Siemens SITRANS RD500 48. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Anche per Siemens SITRANS RD500: Manuale di istruzioni per l'uso (8 pagine), Manuale di istruzioni per l'uso (8 pagine), Manuale di istruzioni per l'uso (8 pagine), Manuale di applicazione (6 pagine), Manuale (11 pagine), Esempi di applicazione (9 pagine)

Appendix A: Input Modules

Belden 9842 is a multi-conductor cable which is recommended for use with

Note:

RS-485 industrial networks. The cable comprises four conductors and an overall

braided shield. It is recommended that you use three of the four conductors for A,

B, and Common connections. The shield on the cable should be connected to

ground at one point to ensure best noise immunity.

The RD500 hardware includes an RS-485 Modbus RTU interface to field instruments

using an RJ-45 connector.

•

Allows for long cable runs and multi-drop instrument connection.

•

Address up to 247 Modbus instruments on a single two-wire network up to 1200 m

(3900 ft) away. Can be increased using a repeater and/or standard RS-485 network

equipment.

Notes:

•

RS-485 wiring maximum length 1200 m (3900 ft)

Communication Settings

•

Protocol Type = Modbus RTU and Modbus ASCII

•

RTU Framing = Detect via Timing

•

Slave Response Timeout = 1000

•

Baudrate = selectable

•

Databits = 1

•

Parity = None

•

Stopbits = 1

7ML19985MA01

SITRANS RD500 – OPERATING INSTRUCTIONS

Page 37