Siemens SITRANS RD500 Instrukcja obsługi - Strona 39

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik Siemens SITRANS RD500. Siemens SITRANS RD500 48 stron. Configuring sitrans rd500 for connection to multiranger with modbus rtu
Również dla Siemens SITRANS RD500: Instrukcja obsługi (8 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (8 strony), Podręcznik aplikacji (6 strony), Podręcznik (11 strony), Przykłady zastosowań (9 strony)

Appendix A: Input Modules

Belden 9842 is a multi-conductor cable which is recommended for use with

Note:

RS-485 industrial networks. The cable comprises four conductors and an overall

braided shield. It is recommended that you use three of the four conductors for A,

B, and Common connections. The shield on the cable should be connected to

ground at one point to ensure best noise immunity.

The RD500 hardware includes an RS-485 Modbus RTU interface to field instruments

using an RJ-45 connector.

•

Allows for long cable runs and multi-drop instrument connection.

•

Address up to 247 Modbus instruments on a single two-wire network up to 1200 m

(3900 ft) away. Can be increased using a repeater and/or standard RS-485 network

equipment.

Notes:

•

RS-485 wiring maximum length 1200 m (3900 ft)

Communication Settings

•

Protocol Type = Modbus RTU and Modbus ASCII

•

RTU Framing = Detect via Timing

•

Slave Response Timeout = 1000

•

Baudrate = selectable

•

Databits = 1

•

Parity = None

•

Stopbits = 1

7ML19985MA01

SITRANS RD500 – OPERATING INSTRUCTIONS

Page 37