Cisco 8831 Manuale di installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione per Telefono IP Cisco 8831. Cisco 8831 14. Hard factory reset
Anche per Cisco 8831: Caratteristiche (17 pagine), Manuale d'uso (6 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso (6 pagine), Manuale di riferimento rapido (6 pagine), Manuale d'uso (15 pagine), Manuale di riferimento rapido (2 pagine), Manuale di avvio rapido (13 pagine), Manuale di risoluzione dei problemi (3 pagine)

Cisco Unified IP Conference Phone 8831 Installation

Procedure

Step 1

Align the ferrite bead with the head of the network cable and move the ferrite bead along the cable until there

is a gap of 1.0 mm +/- 0.3 mm between the bead and the connector.

Step 2

Place the cable into the ferrite bead channel and loop the cable around the ferrite bead so that the cable exits

the bottom of the bead.

Step 3

Hold the cable in the ferrite bead channel and close the ferrite bead. Snap the latch closed.

Install Cisco Unified IP Conference Phone 8831

Before you install a conference phone, even if it is new, upgrade the conference phone to the current

Note

firmware image. Before using external devices, see the Readme file for safety and performance information.

Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0

Install Cisco Unified IP Conference Phone 8831