Cisco 8831 Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco 8831. Cisco 8831 14 pagina's. Hard factory reset
Ook voor Cisco 8831: Kenmerken (17 pagina's), Uitrolhandleiding (6 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (6 pagina's), Snelle referentiehandleiding (6 pagina's), Gebruikershandleiding (15 pagina's), Snelle referentiehandleiding (2 pagina's), Snelstarthandleiding (13 pagina's), Handleiding voor probleemoplossing (3 pagina's)

Cisco Unified IP Conference Phone 8831 Installation

Procedure

Step 1

Align the ferrite bead with the head of the network cable and move the ferrite bead along the cable until there

is a gap of 1.0 mm +/- 0.3 mm between the bead and the connector.

Step 2

Place the cable into the ferrite bead channel and loop the cable around the ferrite bead so that the cable exits

the bottom of the bead.

Step 3

Hold the cable in the ferrite bead channel and close the ferrite bead. Snap the latch closed.

Install Cisco Unified IP Conference Phone 8831

Before you install a conference phone, even if it is new, upgrade the conference phone to the current

Note

firmware image. Before using external devices, see the Readme file for safety and performance information.

Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0

Install Cisco Unified IP Conference Phone 8831