Cisco 8831 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 8831에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8831 14 페이지. Hard factory reset
Cisco 8831에 대해서도 마찬가지입니다: 특징 (17 페이지), 배포 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (6 페이지), 빠른 참조 매뉴얼 (6 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (13 페이지), 문제 해결 매뉴얼 (3 페이지)

Cisco Unified IP Conference Phone 8831 Installation

Procedure

Step 1

Align the ferrite bead with the head of the network cable and move the ferrite bead along the cable until there

is a gap of 1.0 mm +/- 0.3 mm between the bead and the connector.

Step 2

Place the cable into the ferrite bead channel and loop the cable around the ferrite bead so that the cable exits

the bottom of the bead.

Step 3

Hold the cable in the ferrite bead channel and close the ferrite bead. Snap the latch closed.

Install Cisco Unified IP Conference Phone 8831

Before you install a conference phone, even if it is new, upgrade the conference phone to the current

Note

firmware image. Before using external devices, see the Readme file for safety and performance information.

Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0

Install Cisco Unified IP Conference Phone 8831