Ricoh S7 D3DS Manuale di servizio sul campo - Pagina 16

Sfoglia online o scarica il pdf Manuale di servizio sul campo per Accessori per stampanti Ricoh S7 D3DS. Ricoh S7 D3DS 23. Double-feed kit

1.Install

23. Make sure there is no slack in the harnesses, and then fasten the sensor harnesses under the hooks at [A] and [B].

24. Push the shielded harnesses into the channel at the rear corner.

Re-assembly

Set the feed cover as shown.

Set the shaft of the upper guide [A] on the edge of the feed cover.

Make sure that the shielded harnesses [B] are not pinched between the cover and the guide, and then lower the