Ricoh S7 D3DS Field Service Manual - Page 16
Browse online or download pdf Field Service Manual for Printer Accessories Ricoh S7 D3DS. Ricoh S7 D3DS 23 pages. Double-feed kit
Print Page
1.Install
23. Make sure there is no slack in the harnesses, and then fasten the sensor harnesses under the hooks at [A] and [B].
24. Push the shielded harnesses into the channel at the rear corner.
Re-assembly
1.
Set the feed cover as shown.
2.
Set the shaft of the upper guide [A] on the edge of the feed cover.
3.
Make sure that the shielded harnesses [B] are not pinched between the cover and the guide, and then lower the
14