Ricoh S7 D3DS Handleiding voor buitendienst - Pagina 16

Blader online of download pdf Handleiding voor buitendienst voor {categorie_naam} Ricoh S7 D3DS. Ricoh S7 D3DS 23 pagina's. Double-feed kit

1.Install

23. Make sure there is no slack in the harnesses, and then fasten the sensor harnesses under the hooks at [A] and [B].

24. Push the shielded harnesses into the channel at the rear corner.

Re-assembly

Set the feed cover as shown.

Set the shaft of the upper guide [A] on the edge of the feed cover.

Make sure that the shielded harnesses [B] are not pinched between the cover and the guide, and then lower the