Cisco ASA 5506W-X Manuale del software - Pagina 8

Sfoglia online o scarica il pdf Manuale del software per Hardware di rete Cisco ASA 5506W-X. Cisco ASA 5506W-X 37. Threat defense reimage guide
Anche per Cisco ASA 5506W-X: Manuale di avvio rapido (10 pagine), Manuale di configurazione (13 pagine), Manuale di avvio rapido (14 pagine), Manuale di configurazione facile (11 pagine), Montare e collegare (12 pagine), Manuale di installazione (46 pagine), Montare il telaio (10 pagine)

Reimage from ASA to Firepower Threat Defense

gateway gateway_ip_address

filepath/filename

set

sync

tftpdnld

The FTD boot image downloads and boots up to the boot CLI.

See the following information:

• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other

models always use the Management 1/1 interface.

• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.

• sync—Saves the network settings.

• tftpdnld—Loads the boot image..

Example:

Example for the ASA 5555-X:

rommon 0 > interface gigabitethernet0/0

rommon 1 > address 10.86.118.4

rommon 2 > netmask 255.255.255.0

rommon 3 > server 10.86.118.21

rommon 4 > gateway 10.86.118.1

rommon 5 > file ftd-boot-latest.cdisk

rommon 6 > set

ROMMON Variable Settings:

ADDRESS=10.86.118.3

NETMASK=255.255.255.0

SERVER=10.86.118.21

GATEWAY=10.86.118.21

PORT=GigabitEthernet0/0

VLAN=untagged

IMAGE=ftd-boot-latest.cdisk

CONFIG=

LINKTIMEOUT=20

PKTTIMEOUT=4

RETRY=20

rommon 7 > sync

Updating NVRAM Parameters...

rommon 8 > tftpdnld

Example for the ASA 5506-X:

rommon 0 > address 10.86.118.4

rommon 1 > netmask 255.255.255.0

rommon 2 > server 10.86.118.21

rommon 3 > gateway 10.86.118.21

rommon 4 > file ftd-boot-latest.lfbff

rommon 5 > set

ROMMON Variable Settings:

Cisco ASA and Firepower Threat Defense Reimage Guide