Cisco ASA 5506W-X Software Handleiding - Pagina 8

Blader online of download pdf Software Handleiding voor {categorie_naam} Cisco ASA 5506W-X. Cisco ASA 5506W-X 37 pagina's. Threat defense reimage guide
Ook voor Cisco ASA 5506W-X: Snelstarthandleiding (10 pagina's), Configuratiehandleiding (13 pagina's), Snelstarthandleiding (14 pagina's), Eenvoudige installatiehandleiding (11 pagina's), Monteren en aansluiten (12 pagina's), Installatiehandleiding (46 pagina's), Het chassis monteren (10 pagina's)

Reimage from ASA to Firepower Threat Defense

gateway gateway_ip_address

filepath/filename

set

sync

tftpdnld

The FTD boot image downloads and boots up to the boot CLI.

See the following information:

• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other

models always use the Management 1/1 interface.

• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.

• sync—Saves the network settings.

• tftpdnld—Loads the boot image..

Example:

Example for the ASA 5555-X:

rommon 0 > interface gigabitethernet0/0

rommon 1 > address 10.86.118.4

rommon 2 > netmask 255.255.255.0

rommon 3 > server 10.86.118.21

rommon 4 > gateway 10.86.118.1

rommon 5 > file ftd-boot-latest.cdisk

rommon 6 > set

ROMMON Variable Settings:

ADDRESS=10.86.118.3

NETMASK=255.255.255.0

SERVER=10.86.118.21

GATEWAY=10.86.118.21

PORT=GigabitEthernet0/0

VLAN=untagged

IMAGE=ftd-boot-latest.cdisk

CONFIG=

LINKTIMEOUT=20

PKTTIMEOUT=4

RETRY=20

rommon 7 > sync

Updating NVRAM Parameters...

rommon 8 > tftpdnld

Example for the ASA 5506-X:

rommon 0 > address 10.86.118.4

rommon 1 > netmask 255.255.255.0

rommon 2 > server 10.86.118.21

rommon 3 > gateway 10.86.118.21

rommon 4 > file ftd-boot-latest.lfbff

rommon 5 > set

ROMMON Variable Settings:

Cisco ASA and Firepower Threat Defense Reimage Guide