Cisco ASA 5516-X Manuale di installazione dell'hardware - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Hardware di rete Cisco ASA 5516-X. Cisco ASA 5516-X 32. Threat defense reimage guide
Anche per Cisco ASA 5516-X: Manuale di avvio rapido (8 pagine), Manuale di configurazione facile (11 pagine), Manuale di avvio rapido (9 pagine), Manuale del software (37 pagine), Montare e collegare (6 pagine), Manuale (14 pagine)

Overview

LED

Status

Active

SSD

Network Port Status

On the rear panel, a pair of LEDs (Link status and connection Status) for each of the eight Gigabit Ethernet

network ports, and the Gigabit Ethernet Management port.

Link status (L):

• Unlit – No link, or port is not in use.

• Solid green – Link established.

• Flashing green – Link activity.

Connection-speed status (S):

• One blink every three seconds – 10 Mbps.

• Two rapid blinks – 100 Mbps.

• Three rapid blinks – 1000 Mbps.

Online Only

Description

System operating status:

• Green – Normal system function.

• Amber – Critical alarm indicating one or more of the following:

• Major failure of a hardware or software component.

• Over-temperature condition.

• Power voltage outside the tolerance range.

Status of the failover pair:

• Solid green – Failover pair operating normally.

• Unlit – Failover is not operational.

SSD LED behavior at first customer ship:

• Unlit – No SSD present.

• Green – SSD installed.

SSD LED behavior after June 2017:

• Unlit – No SSD present or no activity on the SSD.

• Green – Activity on the SSD.

Note

See

Replace the SSD , on page 27

SSD.

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide

for information on replacing a failed

LEDs