Cisco ASA 5516-X 하드웨어 설치 매뉴얼 - 페이지 9
{카테고리_이름} Cisco ASA 5516-X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5516-X 32 페이지. Threat defense reimage guide
Cisco ASA 5516-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 간편한 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (9 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (6 페이지), 매뉴얼 (14 페이지)
페이지 인쇄
Overview
LED
Status
Active
SSD
Network Port Status
On the rear panel, a pair of LEDs (Link status and connection Status) for each of the eight Gigabit Ethernet
network ports, and the Gigabit Ethernet Management port.
Link status (L):
• Unlit – No link, or port is not in use.
• Solid green – Link established.
• Flashing green – Link activity.
Connection-speed status (S):
• One blink every three seconds – 10 Mbps.
• Two rapid blinks – 100 Mbps.
• Three rapid blinks – 1000 Mbps.
Online Only
Description
System operating status:
• Green – Normal system function.
• Amber – Critical alarm indicating one or more of the following:
• Major failure of a hardware or software component.
• Over-temperature condition.
• Power voltage outside the tolerance range.
Status of the failover pair:
• Solid green – Failover pair operating normally.
• Unlit – Failover is not operational.
SSD LED behavior at first customer ship:
• Unlit – No SSD present.
• Green – SSD installed.
SSD LED behavior after June 2017:
• Unlit – No SSD present or no activity on the SSD.
• Green – Activity on the SSD.
Note
See
Replace the SSD , on page 27
SSD.
Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide
for information on replacing a failed
LEDs
5